Dell PowerConnect PC5524

Address Table Commands 409
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example displays the multicast configuration for VLAN 1.
show bridge multicast unregistered
Use the show bridge multicast unregistered EXEC mode command to
display the unregistered multicast filtering configuration.
Syntax
show bridge multicast unregistered [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
-----
gi1/0/1
gi1/0/2
gi1/0/3
Forward-All
Static
---------
Forbidden
Forward
-
Status
------
Filter
Forward(s)
Forward(d)