SNMP Commands 167
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
the remote engine ID is not configured first, the configuration command
fails.
Example
snmp-server user
====================
console(config)# snmp-server user tom acbd v1
console(config)# snmp-server user tom acbd v2c
console(config)# snmp-server engineid local default
The engine-id must be unique within your administrative domain.
Do you wish to continue? [Y/N]
y
The SNMPv3 database will be erased. Do you wish to continue? [Y/N]
y
console(config)# snmp-server user tom acbd v3
snmp-server filter
The snmp-server filter Global Configuration mode command creates or
updates a Simple Network Management Protocol (SNMP) server filter entry.
Use the no form of this command to remove the specified SNMP server filter
entry.
Syntax
snmp-server filter
filter-name
oid-tree {included | excluded}
no snmp-server filter
filter-name
[
oid-tree
]
Parameters
•
filter-name
—Specifies the label for the filter record that is being updated
or created. The name is used to reference the record. (Length: 1–30
characters)
To Next Page
Loading...
