Dell PowerConnect PC5524

636 IPv6 Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IPv6_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
nameName of the host. (Range: 1–158 characters)
• ipv6-address1 —Associated IPv6 address. This argument must be in the
form documented in RFC 2373 where the address is specified in
hexadecimal using 16-bit values between colons. When the IPv6 address is
a Link Local address (IPv6Z address), the outgoing interface name must
be specified. Refer to the user guidelines for the interface name syntax.
•
ipv6-address2-4 —(Optional) Additional IPv6 addresses that may be
associated with the host’s name
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
The format of an IPv6Z address is: <ipv6-link-local-address>%<interface-
name>
interface-name = vlan<integer> | ch<integer> | isatap<integer> |
<physical-port-name>
integer = <decimal-number> | <integer><decimal-number>
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
physical-port-name = Designated port number, for example
1/0/ 16.
Example
console(config)# ipv6 host server 3000::a31b
ipv6 neighbor
Use the ipv6 neighbor command to configure a static entry in the IPv6
neighbor discovery cache. Use the no form of this command to remove a
static IPv6 entry from the IPv6 neighbor discovery cache.