Dell PowerConnect PC5524

390 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
• port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
No forbidden addresses are defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Before defining forbidden ports, the multicast group should be registered.
You can execute the command before the VLAN is created.
Example
The following example forbids MAC address 0100.5e02.0203 on port 2/9
within VLAN 8.
Console(config)# interface vlan 8
Console(config-if)#
bridge multicast address 0100.5e.02.0203
Console(config-if)#
bridge multicast forbidden address
0100.5e02.0203
add gi1/0/9
bridge multicast unregistered
Use the bridge multicast unregistered Interface Configuration (Ethernet,
Port-Channel) mode command to configure the forwarding state of
unregistered multicast addresses. Use the no form of this command to restore
the default configuration.
Syntax
bridge multicast unregistered {forwarding | filtering}
no bridge multicast unregistered
Parameters
• forwarding —Forwards unregistered multicast packets.