Dell PowerConnect PC5524

620 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Console(config)# ip host accounting.website.com 176.10.23.1
clear host
Use the clear host Privileged EXEC mode command to delete entries from
the host name-to-address cache.
Syntax
clear host {name | *}
Parameters
• name —Specifies the host entry to remove. (Length: 1–158 characters.
Maximum label length: 63 characters
)
• * —Removes all entries.
Command Mode
Privileged EXEC mode
Example
The following example deletes all entries from the host name-to-address
cache.
Console# clear host *
clear host dhcp
Use the clear host dhcp Privileged EXEC mode command to delete entries
from the host name-to-address mapping received from Dynamic Host
Configuration Protocol (DHCP).
Syntax
clear host dhcp {name | *}
Parameters
• name —Specifies the host entry to remove. (Length: 1–158 characters.
Maximum label length: 63 characters
)