PHY Diagnostics Commands 353
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Phy_Diagnostics.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show cable-diagnostics cable-length
Use the show cable-diagnostics cable-length EXEC mode command to
display the estimated copper cable length attached to all ports or to a specific
port.
Syntax
show cable-diagnostics cable-length [
interface
interface-id
]
Parameters
interface-id—Specify an interface ID. The interface ID must be an Ethernet
port.
Command Mode
EXEC mode
User Guidelines
The port must be active and working at 100 M or 1000 M.
Example
The following example displays the estimated copper cable length attached to
all ports.
show fiber-ports optical-transceiver
Use the show fiber-ports optical-transceiver EXEC mode command to
display the optical transceiver diagnostics.
Console>
show cable-diagnostics cable-length
Port
----
gi1/0/
1
gi1/0/
2
gi1/0/
3
gi1/0/
4
Length [meters]
-----------------
< 50
Copper not active
110-140
Fiber
To Next Page
Loading...
Need help?
General