Dell PowerConnect PC5524

LACP Commands 543
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LACP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
• long —Specifies the long timeout value.
•
short —Specifies the short timeout value.
Default Configuration
The default port timeout value is Long.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example assigns a long administrative LACP timeout to
gigabitethernet port 1/0/6.
Console(config)# interface gigabitethernet 1/0/6
Console(config-if)#
lacp timeout long
show lacp
Use the show lacp EXEC mode command to display LACP information for
all Ethernet ports or for a specific Ethernet port.
Syntax
show lacp interface-id [ parameters | statistics | protocol-state ]
Parameters
• parameters —Displays parameters only.
•
statistics —Displays statistics only.
•
protocol-state —Displays protocol state only.
Command Mode
EXEC mode