Dell PowerConnect PC5524

530 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IGMP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
The IGMP Snooping Querier disables itself if it detects IGMP traffic from a
multicast router. It restarts automatically after host-time-out/2.
Following are the IGMP snooping querier parameters as a function of the
IGMP snooping parameters:
• QueryMaxResponseTime: host-time-out/10.
• QueryInterval: host-time-out/ 3.
Example
console(config)# ip igmp snooping vlan 1 querier
ip igmp snooping querier address
Use the ip igmp snooping querier address Global Configuration mode
command to define the source IP address that the IGMP snooping querier
would use. Use the no form of this command to return to default.
Syntax
ip igmp snooping vlan vlan-id querier address ip-address
no ip igmp snooping vlan vlan-id querier address
Parameters
• vlan-id —Specifies the VLAN.
•
ip-addres —Source IP address.
Default
If an IP address is configured for the VLAN, it is used as the source address of
the IGMP snooping querier.
Command Mode
Global Configuration mode
User Guidelines
If an IP address is not configured by this command, and no IP address is
configured for the querier’s VLAN, the querier is disabled.