330 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
console(config)#
interface range
gi1/0/1-20
description
Use the description Interface Configuration (Ethernet, Port-channel) mode
command to add a description to an interface. Use the no form of this
command to remove the description.
Syntax
description
string
no description
Parameters
string—Specifies a comment or a description of the port to assist the user.
(Length: 1–64 characters)
Default Configuration
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
Example
The following example adds the description ‘SW#3’ to gigabitethernet port
1/0/
5.
Console(config)#
interface
gigabitethernet 1/0/5
Console(config-if)#
description
SW#3
speed
Use the speed Interface Configuration (Ethernet, Port-channel) mode
command to configure the speed of a given Ethernet interface when not
To Next Page
Loading...
