Dell PowerConnect PC5524

User Interface Commands 53
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\User_Interface.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Command Mode
All configuration modes
Example
The following example executes the show vlan Privileged EXEC mode
command from Global Configuration mode.
Example
Console (Config)# do show vlan
Vlan Name Ports Type Authorization
---- ---- --------------------------- -------- -------------
1 1 gi1/0/1-39,Po1,Po2, other Required
Po3,Po4,Po5,Po6,Po7,Po8
2 2 gi1/0/1 dynamicGvrp Required
10 v0010 gi1/0/1 permanent Not Required
11 V0011 gi1/0/1,gi1/0/13 permanent Required
20 20 gi1/0/1 permanent Required
30 30 gi1/0/1,gi1/0/13 permanent Required
31 31 gi1/0/1 permanent Required
91 91 gi1/0/1,gi1/0/40 permanent Required
4093 guest-vlan gi1/0/1,gi1/0/13 permanent Guest
console(config)#s
banner exec
Use the banner exec command to specify and enable a message to be
displayed when an EXEC process is created (The user has successfully logged
in), use the banner exec command in Global Configuration mode. Use the no
form of this command to delete the existing EXEC banner.
Syntax
banner exec d message-text d
no banner exec