Dell PowerConnect PC5524

434 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Console(config)# interface gigabitethernet 1/0/3
Console(config)# lldp med enable location
lldp med notifications topology-change
Use the lldp med notifications topology-change Interface Configuration
(Ethernet) mode command to enable sending LLDP MED topology change
notifications. Use the no form of this command to restore the default
configuration.
Syntax
lldp med notifications topology-change {enable | disable}
no lldp med notifications topology-change
Parameters
• enable —Enables sending LLDP MED topology change notifications.
•
disable —Disables sending LLDP MED topology change notifications.
Default Configuration
Disable is the default.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables sending LLDP MED topology change
notifications on gigabitethernet port
1/0/ 2.
Console(config)# interface gigabitethernet 1/0/2
Console(config)# lldp med notifications topology-change enable