338 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after resetting the device.
Example
The following example enables jumbo frames on the device.
Console(config)#
port jumbo-frame
clear counters
Use the show interfaces counters EXEC mode command to display traffic
seen by all the physical interfaces or by a specific interface.
Syntax
show interfaces counters
[interface-id] [detailed]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
detailed—Displays information for non-present ports in addition to present
ports.
Command Mode
EXEC mode
Example
The following example clears the statistics counters for gigabitethernet port
1/0/5.
Console#
clear counters
gigabitethernet 1/0/5
.
To Next Page
Loading...
