Dell PowerConnect PC5524

LLDP Commands 435
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
lldp med fast-start repeat-count
Use the lldp med fast-start repeat-count Global Configuration mode
command to configure the number of times the fast start LLDPDU is being
sent during the activation of the fast start mechanism defined by LLDP-
MED. Use the no form of this command return to default.
Syntax
lldp med fast-start repeat-count number
no lldp med fast-start repeat-count
Parameters
number—Specifies the number of times the fast start LLDPDU is being sent
during the activation of the fast start mechanism.
Default
3
Command Mode
Global Configuration mode
Example
console(config)# lldp med fast-start repeat-count 4
lldp med network-policy (global)
Use the lldp med network-policy Global Configuration mode command to
define LLDP MED network policy. Use the no form of this command to
remove LLDP MED network policy.
Syntax
lldp med network-policy number application [vlan id] [vlan-type {tagged |
untagged}] [up priority] [dscp value]
no lldp med network-policy number