Dell PowerConnect PC5524

290 RMON Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\RMON.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
• trap —Specifies that an SNMP trap is sent to one or more management
stations by the device for this event.
•
log-trap —Specifies that an entry is generated in the log table and an
SNMP trap is sent to one or more management stations by the device for
this event.
•
community text —Specifies the SNMP community to which an SNMP
trap is sent. (Octet string;
length: 0–127 characters)
•
description text —Specifies a comment describing this event. (Length:
0–127 characters)
•
owner name —Specifies the name of the person who configured this event.
(Valid string)
Default Configuration
If the owner name is not specified, it defaults to an empty string.
Command Mode
Global Configuration mode
Example
The following example configures an event identified as index 10, for which
the device generates a notification in the log table.
Console(config)# rmon event 10 log
show rmon events
Use the show rmon events EXEC mode command to display the RMON
event table.
Syntax
show rmon events
Command Mode
EXEC mode