Dell PowerConnect PC5524

532 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IGMP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
ip igmp query-interval seconds
no ip igmp query-interval
Parameters
seconds—Frequency, in seconds, at which IGMP query messages are sent on
the interface. (Range: 30–18000)
Default
125
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
ip igmp query-max-response-time
Use the ip igmp query-max-response-time Interface Configuration mode
command to configure the Query Maximum Response time. Use the no
format of the command to return to default.
Syntax
ip igmp query-max-response-time seconds
no ip igmp query-max-response-time
Parameters
seconds—Maximum response time, in seconds, advertised in IGMP queries.
(Range: 5–20)
Default
10