Dell PowerConnect PC5524

392 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
• ethernet interface-list —Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
•
port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
Forwarding of all multicast packets is disabled.
Command Mode
Interface Configuration (VLAN) mode
Example
The following example enables all multicast packets on port gi1/0/8 to be
forwarded.
Console(config)# interface vlan 2
Console(config-if)#
bridge multicast forward-all add gi1/0/8
bridge multicast forbidden forward-all
Use the bridge multicast forbidden forward-all Interface Configuration
(VLAN) mode command to forbid a port to dynamically join multicast
groups. Use the no form of this command to restore the default
configuration.
Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet interface-
list | port-channel port-channel-list}
no bridge multicast forbidden forward-all
Parameters
• add —Forbids forwarding of all multicast packets.
•
remove —Does not forbid forwarding of all multicast packets.