Dell PowerConnect PC5524

User Interface Commands 41
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\User_Interface.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
2
User Interface Commands
enable
The enable EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [ privilege-level ]
Parameters
privilege-level—Specifies the privilege level at which to enter the system.
(Range: 1–
15)
Default Configuration
The default privilege level is 15.
Command Mode
EXEC mode
Example
The following example enters the Privileged EXEC mode.
Console> enable
enter password:
Console#