Dell PowerConnect PC5524

IPv6 Addressing Commands 639
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IPv6_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default Configuration
MLD version 1.
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode
console(config)# interface vlan 1
console(config-if)#
ipv6 mld version 2
ipv6 mld join-group
Use the ipv6 mld join-group Interface Configuration mode command to
configure Multicast Listener Discovery (MLD) reporting for a specified
group. Use the no form of this command to cancel reporting and leave the
group.
Syntax
ipv6 mld join-group group-address
no ipv6 mld join-group group-address
Parameters
group-address—Specifies the IPv6 address of the multicast group.
Default Configuration
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode
User Guidelines
The ipv6 mld join-group command configures MLD reporting for a specified
group. The packets that are addressed to a specified group address will be
passed up to the client process in the device.