Dell PowerConnect PC5524

342 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Examples
The following examples display auto-negotiation information.
show interfaces description
Use the show interfaces description EXEC mode command to display the
description for all configured interfaces or for a specific interface.
Syntax
show interfaces description [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Console# show interfaces advertise
Port
----
gi1/0/1
gi1/0/2
Type
----------
1G-Copper
1G-Copper
Neg
------
Enable
Enable
Operational Link Advertisement
------------------------------
1000f, 100f, 10f, 10h
1000f
Console#
show interfaces advertise gigabitethernet 1/0/1
Port:gi1/0/1
Type: 1G-Copper
Link state: Up
Auto Negotiation: enabled
Admin Local link Advertisement
Oper Local link Advertisement
Remote Local link
Advertisement
Priority Resolution
10h
---
yes
yes
no
-
10f
---
yes
yes
no
-
100
h
---
-
yes
yes
yes
-
100f
----
yes
yes
yes
-
1000f
-----
yes
yes
yes
yes
Console#
show interfaces advertise gigabitethernet 1/0/1
Port: gi1/0/1
Type: 1G-Copper
Link state: Up
Auto negotiation: disabled.