Dell PowerConnect PC5524

84 System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\System_Management.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Command Mode
Global Configuration mode
Example
The following example forces the stack master to be unit 2.
Console(config)# stack master unit 2
system light
Use the system light EXEC command to light LEDs on a specific unit.
Syntax
system light [ unit unit-number] [duration seconds ]
system light stop
Parameters
• unit-number —Specify unit number or all.
•
seconds —The number of seconds to light the LEDs. If unspecified,
defaults to 5 seconds. (Range: 2–6)
•
stop —Stop lighting the LEDs.
Command Mode
EXEC mode
switch renumber
Use the switch renumber Global Configuration command to change the unit
ID of a specific unit.
Syntax
switch current-unit-number renumber new-unit-number
Parameters
• current-unit-number —Specify Unit number. (Range: 1– 8)