Syslog Commands 265
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
17
Syslog Commands
logging on
Use the logging on Global Configuration mode command to control error
message logging. This command sends debug or error messages to a logging
process, which logs messages asynchronously to designated locations for the
process that generated the messages. Use the no form of this command to
disable the logging process.
Syntax
logging on
no logging on
Default Configuration
Message logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the logging messages distribution at various
destinations, such as the logging buffer, logging file or syslog server. Logging
on and off at these destinations can be individually configured using the
logging buffered, logging file, and logging Global Configuration mode
commands. However, if the logging on command is disabled, no messages are
sent to these destinations. Only the console receives messages.
To Next Page
Loading...
