Dell PowerConnect PC5524

474 Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Spanning-Tree.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
value—Specifies the MST configuration revision number. (Range: 0–65535)
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1
show (MST)
Use the show MST Configuration mode command to displays the current or
pending MST region configuration.
Syntax
show {current | pending}
Parameters
• current —Displays the current MST region configuration.
•
pending —Displays the pending MST region configuration.
Command Mode
MST Configuration mode