VLAN Commands 515
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\VLAN_ISCLI_Only.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
•
primary-vlan-id
—The VLAN ID of the primary VLAN.
•
secondary-vlan-list
—Specifies one or more secondary VLANs.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
The secondary VLANs should be associated with the primary VLANs,
otherwise the configuration is not accepted. See the command private-vlan
association.
switchport private-vlan host-association
Use the switchport private-vlan host-association Interface Configuration
mode command to configure the VLANs of the private-vlan host port. Use
the no form of this command to reset to default.
Syntax
switchport private-vlan host-association
primary-vlan-id secondary-vlan-id
no switchport private-vlan host-association
Parameters
•
primary-vlan-id
—The VLAN ID of the primary VLAN.
•
secondary-vlan-list
—Specifies the secondary VLANs. The secondary
VLAN is an isolated port.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
To Next Page
Loading...
