VLAN Commands 513
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\VLAN_ISCLI_Only.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
private-vlan
{primary | isolated}
no private-vlan
Parameters
•Primary
—Designate the VLAN as Primary VLAN.
•
Isolated
—Designate the VLAN as Isolated VLAN.
Default Configuration
No private VLANs are configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
• The VLAN type cannot be changed if there is a private-VLAN port that is a
member in the VLAN.
• The VLAN type cannot be changed if it is associated with other private
VLANs.
• The VLAN type is not kept as a property of the VLAN when it is deleted.
private-vlan association
Use the private-vlan association Interface VLAN Configuration mode
command to configure the association between the primary VLAN and the
secondary VLANs.. Use the no form of this command to remove the
association.
Syntax
private-vlan association
[add | remove] secondary-vlan-list
no private-vlan association
Parameters
•
add
—Associates a secondary VLAN to a primary VLAN. This is the default
action.
To Next Page
Loading...
