Dell PowerConnect PC5524

Telnet, SSH and Slogin Commands 211
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Telnet_SSH_and_Slogin.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show crypto key pubkey-chain ssh
The show crypto key pubkey-chain ssh Privileged EXEC mode command
displays SSH public keys stored on the device.
Syntax
show crypto key pubkey-chain ssh [username username] [fingerprint
{bubble-babble | hex}
]
Parameters
• username username —Specifies the remote SSH client username. (Length:
1–48 characters)
•
fingerprint { bubble-babble | hex }—Specifies the fingerprint display
format. The possible values are:
• bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
• hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
Command Mode
Privileged EXEC mode
Example
The following examples display SSH public keys stored on the device.
Console# show crypto key pubkey-chain ssh
Username
--------
Cipher The encryption type (3DES, Blowfish, RC4)
Auth Code The authentication Code (HMAC-MD5, HMAC-SHA1)
Field Description