Dell PowerConnect PC5524

140 Configuration/Image File Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Configuration_Image.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show startup-config
The show startup-config Privileged EXEC mode command displays the
startup configuration file contents.
Syntax
show startup-config
Command Mode
Privileged EXEC mode
Example
The following example displays the startup configuration file contents.
Console# show startup-config
no spanning-tree
interface range
gi1/0/ 1-48
speed 1000
exit
no lldp run
interface vlan 1
ip address 1.1.1.1 255.0.0.0
exit
line console
exec-timeout 0
exit
console#
show bootvar
The show bootvar EXEC mode command displays the active system image
file that is loaded by the device at startup.
Syntax
show bootvar [unit unit]