326 802.1x Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Port Ethernet port or port-channel
Reject reason Reason in the case of failure. The following table
describes the reasons.
Time Supplicant Session time
Table 1: Reject Reason Description
Abbreviation Description
ACL-DEL ACL was deleted by a user
ACL-NOTEXST ACL sent by radius Server does not exist on the device
ACL-OVRFL ACL sent by radius server can not be applied because of
TCAM overflow
AUTH-ERR Rejected by Radius due wrong user name or password in
Radius server
FLTR-ERR Radius accept message contains more than 2 filter-id
FRS-MTH-DENY First method is "deny"
IPv6WithMAC Radius accept message contains filter with IPv6 DIP and
MAC addresses
IPV6WithNotIP Radius accept message contains IPv6 and not IP
simultaneously
POL-BasicMode Policy Map is not supported in the QoS basic mode
POL-DEL Policy Map was deleted by a user
POL-OVRFL Policy Map sent by radius server can not be applied
because of TCAM overflow
RAD-APIERR RADIUS API returned error (e.g. No RADIUS server is
configured).
RAD_INVLRES RADIUS server returned invalid packet (e.g. EAP Attribute
is missing)
RAD-NORESP RADIUS server is not responding
VLAN-DFLT VLAN sent by radius server can not be applied because it
is the Default VLAN
To Next Page
Loading...
