440 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
LLDP packets handling: Filtering
Port State Optional TLVs Address Notifications
---- ----- -------------- ------- ------------
gi1/0/1 RX,TX PD, SN, SD, SC 172.16.1.1 Disabled
gi1/0/2 TX PD, SN 172.16.1.1 Disabled
gi1/0/3 RX,TX PD, SN, SD, SC None Disabled
gi1/0/5 RX,TX D, SN, SD, SC automatic Disabled
gi1/0/6 RX,TX PD, SN, SD, SC auto vlan 1 Disabled
gi1/0/7 RX,TX PD, SN, SD, SC auto g1 Disabled
gi1/0/8 RX,TX PD, SN, SD, SC auto ch1 Disabled
Switch# show lldp configuration gi1/0/1
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Notifications interval: 5 seconds
LLDP packets handling: Filtering
Port State Optional TLVs Address Notifications
-------------- -------------- ------------------------
gi1/0/1 RX, TX PD, SN, SD, SC 72.16.1.1 Disabled
802.3 optional TLVs: 802.3-mac-phy, 802.3-lag, 802.3-max-frame-size
802.1 optional TLVs
PVID: Enabled
PPVIDs: 0, 1, 92
VLANs: 1, 92
Protocols: 802.1x
To Next Page
Loading...
