Digi TransPort WR11 - Page 237

Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
237
Command Instance Parameter Values Equivalent web parameter
modemcc 0 posthang_
str
Free text field Post Hang-up string:
modemcc 0 intercall_idle 0-2147483647 Wait n seconds between hanging up and
allowing another call
modemcc 0 att_interval 0-2147483647 Wait n seconds between attachment
attempts
modemcc 0 link_retries 0-2147483647 Reset the module after n unsuccessful
connection attempts
modemcc 0 stat_retries 0-2147483647 Reset the module after n unsuccessful
status retrieval attempts
modemcc 0 ss_interval 0-2147483647 Create a signal strength event every n
minutes
modemcc 0 check_reg 0, 1, 2 If registration is lost for 5 minutes
0=do not reset the module
1=reset the module if the GSM
registration is lost
2=reset the module if the GPRS
registration is lost
modemcc 0 psys 0, 1, 2, 2G, 3G,
4G, 4G3G2G,
4G3G, 4G2G3G,
4G2G, 3G4G2G,
3G4G, 3G2G4G,
3G2G, 2G4G3G,
2G4G, 2G3G4G,
2G3G
Preferred System.
This parameter allows the module to
“lock” to a particular connection type.
Possible values include:
0=Auto. Uses default setting, may be set
by the carrier in the SIM
1=GSM
2=WCDMA
2G=2G only
3G=3G only
4G=4G only
4G3G2G=4G, 3G, or 2G only
4G3G=4G or 3G only
4G2G3G= 4G, 2G, 3G only
4G2G=4G, or 2G only
3G4G2G=3G, 4G, or 2G only
3G4G=3G or 4G only
3G2G4G=3G, 2G, or 4G only
3G2G=3G or 2G only
2G4G3G= 2G, 4G, or 3G only
2G4G=2G or 4G only
2G3G4G=2G, 3G, or 4G only
2G3G=2G or 3G only