Digi TransPort WR11 - Page 238

Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
238
Advanced mobile parameters-for SIM Slot 2 (PPP 1)
Command Instance Parameter Values Equivalent web parameter
modemcc 0 Puk_2 sim puk code SIM PUK/Confirm SIM PUK
modemcc 0 init_str_2 Free text field Initialisation string 1
modemcc 0 init_str1_2 Free text field Initialisation string 2
modemcc 0 init_str2_2 Free text field Initialisation string 3
modemcc 0 hang_str_
2
Free text field Hang-up string:
modemcc 0 posthang_
str_2
Free text field Post Hang-up string:
modemcc 0 intercall_
idle_2
0-2147483647 Wait n seconds between hanging up and
allowing another call
modemcc 0 att_
interval_2
0-2147483647 Wait n seconds between attachment
attempts
modemcc 0 link_
retries_2
0-2147483647 Reset the module after n unsuccessful
connection attempts
modemcc 0 stat_
retries_2
0-2147483647 Reset the module after n unsuccessful
status retrieval attempts
modemcc 0 ss_
interval_2
0-2147483647 Create a signal strength event every n
minutes
modemcc 0 check_
reg_2
0, 1, 2 If registration is lost for 5 minutes
0=do not reset the module
1=reset the module if the GSM
registration is lost
2=reset the module if the GPRS
registration is lost