Digi TransPort WR11 - Page 239

Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
239
Command Instance Parameter Values Equivalent web parameter
modemcc 0 Psys_ 0, 1, 2, 2G, 3G, 4G,
4G3G2G, 4G3G,
4G2G3G, 4G2G,
3G4G2G, 3G4G,
3G2G4G, 3G2G,
2G4G3G, 2G4G,
2G3G4G, 2G3G
Preferred System
0=Auto
1=GSM
2=WCDMA
2G=2G only
3G=3G only
4G=4G only
4G3G2G=4G, 3G, or 2G only
4G3G=4G or 3G only
4G2G3G= 4G, 2G, 3G only
4G2G=4G, or 2G only
3G4G2G=3G, 4G, or 2G only
3G4G=3G or 4G only
3G2G4G=3G, 2G, or 4G only
3G2G=3G or 2G only
2G4G3G= 2G, 4G, or 3G only
2G4G=2G or 4G only
2G3G4G=2G, 3G, or 4G only
2G3G=2G or 3G only
Mobile network settings
Command Instance Parameter Values
Equivalent web
parameter
ppp 1 metric 0-256 Metric
ppp 1 off, on Generate Heartbeats
on this interface
ppp 1 hrtbeatip IP address Send Heartbeat
messages to IP
address a.b.c.d every
h hrs m mins s secs
ppp 1 hrtbeatint 0-2147483647
(seconds)
Send Heartbeat
messages to IP
address a.b.c.d every
h hrs m mins s secs
ppp 1 hbipent Default,PPP,Ethernet Use interface x,y for
the source IP
address
ppp 1 hbipadd number Use interface x,y for
the source IP
address
ppp 1 hbroute on/off Select transmit
interface using the
routing table