Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
240
Command Instance Parameter Values
Equivalent web
parameter
ppp 1 hbimsi on/off Include IMSI
information in the
Heartbeat message
ppp 1 hbgps on/off Include GPS
information in the
Heartbeat message
ppp 1 off, on Generate Ping
packets on this
interface
ppp 1 pingsiz number Send n byte pings to
IP host a.b.c.d every
h hrs m mins s secs
ppp 1 pingip IP address Send n byte pings to
IP host a.b.c.d every
h hrs m mins s secs
ppp 1 pingint 0-2147483647
(seconds)
Send n byte pings to
IP host a.b.c.d every
h hrs m mins s secs
ppp 1 pingint2 0-2147483647
(seconds)
Send pings every h
hrs m mins s secs if
ping responses are
not being received
ppp 1 pingip2 IP address Switch to sending
pings to IP host
a.b.c.d after n failures
ppp 1 ip2count number Switch to sending
pings to IP host
a.b.c.d after n failures
ppp 1 pingresp 0-2147483647 Ping responses are
expected within n
seconds
ppp 1 pingis on/off Only send Pings
when this interface is
In Service
ppp 1 ping2cont on/off New connections to
resume with previous
Ping interval
ppp 1 pingdeact 0-2147483647 Reset the link if no
response is received
within s seconds
To Next Page
Loading...
