Digi TransPort WR11 - Page 546

Configuring Secure Shell (SSH) server and client Configure SSH servers
Digi TransPort® Routers User Guide
546
Authentication Preferences
The following configuration options allocate preferences for the authentication methods. As
above, a value of 0 disables the particular authentication method, and lower values indicated
greater preference than higher values. For example, if MAC SHA1-96 was the preferred method
for authentication, this option would be given the value 1 and the other options given a value of
2 or greater. If all these parameters are set to the same value, the router automatically uses
them in the following order:
n SHA1,
n SHA1-96
n MD5
n MD5-96
MAC MD5
The preference level for MAC MD5.
MAC MD5-96
The preference level for MAC MD5-96.
MAC SHA1
The preference level for MAC SHA1.
MAC SHA1-96
The preference level for MAC SHA1-96.
Enable Debug
The router supports logging and output of debugging information for situations where there
are problems establishing a SSH connection. When enabled, this setting causes the router to
trace and output information that should be helpful in diagnosing and resolving the problem.
4. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
ssh 0-7 port 0-65535 Use TCP port p
ssh 0-7 nb_listen 0-2147483647 Allow up to n connections
ssh 0-7 hostkey1 Up to 12 characters
(8.3 format)
Host Key 1 Filename
ssh 0-7 hostkey2 Up to 12 characters
(8.3 format)
Host Key 2 Filename
ssh 0-7 loginsecs 0-2147483647 Maximum login time s seconds