Digi TransPort WR11 - Page 547

Configuring Secure Shell (SSH) server and client Configure SSH servers
Digi TransPort® Routers User Guide
547
Command Instance Parameter Values Equivalent web parameter
ssh 0-7 logintries 0-2147483647 Maximum login attempts n
ssh 0-7 comp 0=disabled Use Deflate compression, level
ssh 0-7 fwd 0-2147483647 Enable port forwarding
ssh 0-7 cmdhost Valid IP address a.b.c.d Command session IP address
a.b.c.d
ssh 0-7 cmdport 0-2147483647 Command session port p
ssh 0-7 svrkeybits 0-2147483647 Server key size
ssh 0-7 initkex off, on Actively start key exchange
ssh 0-7 rekeybytes 0-2147483647
0=Do not rekey
Rekey After n units of data have
been transferred
ssh 0-7 enc3descbc 0-2147483647
0=Disabled
3DES
ssh 0-7 encaes128cbc 0-2147483647 AES (128 bits)
ssh 0-7 encaes192cbc 0-2147483647 AES (192 bits)
ssh 0-7 encaes256cbc 0-2147483647 AES (256 bits)
ssh 0-7 macmd5 0-2147483647 MAC MD5
ssh 0-7 macmd596 0-2147483647 MAC MD5-96
ssh 0-7 macsha1 0-2147483647 MAC SHA1
ssh 0-7 macsha196 0-2147483647 MAC SHA1-96
ssh 0-7 debug 0, 1
0=Off
1=On
Enable Debug