Digi TransPort WR11 - Page 911

Performing device administration tasks Manage files
Digi TransPort® Routers User Guide
911
Use USB filing system commands
Command line
The USB storage device responds to any of the standard filing system commands. For all filing system
commands, the USB storage device is regarded as drive u:.
Note The router does not support subdirectories. Any subdirectories on the USB device display with a
size of 0 bytes on the Administration > File Management > FLASH Directory page.
Display contents of the USB storage device
Enter the command:
di r u:
SERI ALS. TXT 1843
EVENTL~1. TXT 1449
USB. TXT 4278
MASSR1~1. TXT 1255
OK
If the USB storage device is empty, the following message is displayed:
No f i l es
If no USB device is present, the following message is displayed:
No USB f l ash di r ect or y
Copy a file
To copy a file named image from the main flash memory onto the USB device, enter the command:
copy i mage u: i mage
To copy a file named Logcodes.TXT from the USB device to the main flash memory, enter the
command:
copy u: Logcodes. TXT Logcodes. TXT
or
copy u: Logcodes. TXT
If no destination file is specified, the destination is set to the FLASH directory and the file name
remains the same.