Performing device administration tasks Manage files
Digi TransPort® Routers User Guide
912
Use a USB device to upgrade firmware
The following functionality is available from firmware version 4891 onwards.
The TransPort firmware can be upgraded using the USB storage device. To perform an upgrade:
1. Create a simple batch file named pb2.bat.
2. Place the relevant firmware upgrade files into the root directory of the USB storage device.
3. Insert the USB device into the TransPort router.
4. Press the router's reset button twice. The firmware upgrade will begin. You will see output
similar to the following:
ERROR_EXI T
del * . web
copy u: sbi os1 sbi os1
copy u: l ogcodes. t xt l ogcodes. t xt
copy u: i mage i mage
copy u: i mage4. c3 i mage4. c3
copy u: Y4890wVS. web Y4890wVS. web
move sbi os1 sbi os
scanr
f l ashl eds
5. When the LEDs on the TransPort start flashing, the upgrade is complete.
6. Reboot the TransPort router to activate the new firmware.
To Next Page
Loading...
