C
HAPTER
5
| Monitoring the Switch
Displaying Information About Security Settings
– 210 –
◆ QoS Class – The QoS class that NAS has assigned to this port. This
field is blank if the has not been assigned by NAS. Refer to “RADIUS-
Assigned QoS Enabled” for a description of this attribute (see page 94).
◆ Port VLAN ID – The VLAN in which NAS has placed this port. This field
is blank if the Port VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, “(RADIUS-assigned)”
is appended to the VLAN ID. Refer to “RADIUS-Assigned VLAN Enabled”
for a description of this attribute (see page 94).
If the port is moved to the Guest VLAN, “(Guest)” is appended to the
VLAN ID. Refer to “Guest VLAN Enabled” for a description of this
attribute (see page 94).
WEB INTERFACE
To display port status for authentication services, click Monitor, Security,
Network, NAS, Switch.
Figure 80: Network Access Server Switch Status
DISPLAYING PORT
STATISTICS FOR
802.1X OR REMOTE
AUTHENTICATION
SERVICE
Use the NAS Statistics Port selection page to display authentication
statistics for the selected port – either for 802.1X protocol or for the
remote authentication server depending on the authentication method.
This page provides detailed NAS statistics for a specific switch port running
EAPOL-based IEEE 802.1X authentication. For MAC-based authenticated
ports, it shows statistics only for the backend server (RADIUS
Authentication Server).
CLI REFERENCES
◆ "security network nas configuration" on page 355
◆ "security network nas statistics" on page 366
PARAMETERS
These parameters are displayed in the web interface:
Port State
◆ Admin State – The port's current administrative state. Refer to NAS
Admin State for a description of possible values (see page 94).
To Next Page
