Digisol DG-GS4528S - Security Switch Https Redirect; Table 30: HTTPS System Support

C HAPTER 15 | Security Commands
HTTPS Commands
– 321 –
◆ The following web browsers and operating systems currently support
HTTPS:
EXAMPLE
Security/Switch/HTTPS>mode enable
Security/Switch/HTTPS>
security switch
https redirect
This command displays or sets HTTPS redirect mode from HTTP
connections.
SYNTAX
security switch https redirect [enable | disable]
enable - Enables HTTPS redirect. When enabled, management
access to the HTTP web interface for the switch are automatically
redirected to HTTPS.
disable - Disables HTTPS redirect.
DEFAULT SETTING
Disabled
EXAMPLE
Security/Switch/HTTPS>redirect enable
Security/Switch/HTTPS>
Table 30: HTTPS System Support
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Windows Vista
Netscape 6.2 or later Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Windows Vista, Solaris
2.6
Mozilla Firefox 2.0.0.0 or later Windows 2000, Windows XP, Windows Vista, Linux