Digisol DG-GS4528S - ACL Commands; Security Network Acl Configuration; Table 36: ACL Commands

C HAPTER 15 | Security Commands
ACL Commands
– 367 –
ACL COMMANDS
This section describes commands used to configure access control lists,
including policies, responses, and rate limiters.
security network acl
configuration
This command displays ACL configuration settings, including policy,
response, rare limiters, port copy, logging, and shutdown.
SYNTAX
security network acl configuration [port-list]
port-list - A specific port or range of ports. (Range: 1-28, or all)
EXAMPLE
Security/Network/ACL>configuration 1-5
Port Policy Action Rate Limiter Port Copy Logging Shutdown Counter
---- ------ ------ ------------ --------- -------- -------- ------
1 1 Permit Disabled Disabled Disabled Disabled 1463
2 1 Permit Disabled Disabled Disabled Disabled 26429
3 1 Permit Disabled Disabled Disabled Disabled 0
4 1 Permit Disabled Disabled Disabled Disabled 818
5 1 Permit Disabled Disabled Disabled Disabled 818
Rate Limiter Rate
------------ ----
1 1
2 1
3 1
4 1
5 1
Table 36: ACL Commands
Command Function
security network acl
configuration
Displays ACL configuration settings, including policy, response,
rate limiters, port copy, logging, and shutdown
security network acl
action
Displays or sets default action for specified ports, including
permit/deny, rare limiters, port copy, logging, and shutdown
security network acl
policy
Displays or sets the policy assigned to specified ports
security network acl rate Displays or sets the rate limiter and maximum packet rate
security network acl add Adds or modifies an access control entry
security network acl
delete
Deletes an access control entry
security network acl
lookup
Displays the specified access control entry
security network acl clear Clears all ACL counters
security network acl
status
Shows the status for different security modules which use ACL
filtering, including ingress port, frame type, and forwarding action