Digisol DG-GS4528S - Security Network Psec Port; Security Network Psec Switch; Table 33: Port Security Status Commands

C HAPTER 15 | Security Commands
Port Security Status
– 348 –
security network
psec switch
This command shows information about MAC address learning for each
port, including the software module requesting port security services, the
service state, and the current number of learned addresses.
SYNTAX
security network psec switch [port-list]
port-list - A specific port or a range of ports. (Range: 1-28 or all)
DEFAULT SETTING
All ports
COMMAND USAGE
For a description of the information displayed by this command, see
"Displaying Information About Switch Settings for Port Security" on
page 206.
EXAMPLE
Security/Network/Psec>switch 1
Users:
L = Limit Control
8 = 802.1X
D = DHCP Snooping
V = Voice VLAN
Port Users State MAC Cnt
---- ----- ------------- -------
1 L--- Ready 2
Security/Network/Psec>
security network
psec port
This command shows the entries authorized by port security services,
including MAC address, VLAN ID, the service state, time added to table,
age, and hold state.
SYNTAX
security network psec port [port-list]
port-list - A specific port or a range of ports. (Range: 1-28 or all)
Table 33: Port Security Status Commands
Command Function
security network psec
switch
Shows information about MAC address learning for each port,
including the software module requesting port security services,
the service state, and the current number of learned addresses
security network psec
port
Shows the entries authorized by port security services, including
MAC address, VLAN ID, the service state, time added to table,
age, and hold state