Digisol DG-GS4528S - Partial Keyword Lookup; Using Command History

C HAPTER 8 | Using the Command Line Interface
Entering Commands
– 261 –
System Log [<log_id>] [all|info|warning|error] [clear]
>
PARTIAL KEYWORD
LOOKUP
If you terminate a partial keyword with a question mark, alternatives that
match the initial letters are provided. (Remember to leave a space between
the command and question mark.) For example “m ?” shows all the
keywords starting with “m.”
>m ?
Available Commands:
MAC Configuration [<port_list>]
Mirror Configuration [<port_list>]
MLD Configuration [<port_list>]
MVR Configuration
MVR Group
MVR Status
MAC Add <mac_addr> <port_list> [<vid>]
Mirror Port [<port>|disable]
MLD Mode [enable|disable]
MVR Mode [enable|disable]
MAC Delete <mac_addr> [<vid>]
MLD Leave Proxy [enable|disable]
MVR Port Mode [<port_list>] [enable|disable]
MAC Lookup <mac_addr> [<vid>]
Mirror Mode [<port_list>] [enable|disable|rx|tx]
MLD Proxy [enable|disable]
MVR Multicast VLAN [<vid>]
MAC Agetime [<age_time>]
MLD State [<vid>] [enable|disable]
MVR Port Type [<port_list>] [source|receiver]
MAC Learning [<port_list>] [auto|disable|secure]
MLD Querier [<vid>] [enable|disable]
MVR Immediate Leave [<port_list>] [enable|disable]
MAC Dump [<mac_max>] [<mac_addr>] [<vid>]
MLD Fastleave [<port_list>] [enable|disable]
MAC Statistics [<port_list>]
MLD Throttling [<port_list>] [limit_group_number]
MAC Flush
MLD Filtering [<port_list>] [add|del] [group_addr]
MLD Router [<port_list>] [enable|disable]
MLD Flooding [enable|disable]
MLD Groups [<vid>]
MLD Status [<vid>]
MLD Version [<vid>]
>
USING COMMAND
HISTORY
The CLI maintains a history of commands that have been entered. You can
scroll back through the history of commands by pressing the up arrow key.
Any command displayed in the history list can be executed again, or first
modified and then executed.