Digisol DG-GS4528S - Security Switch Snmp Trap Inform Retry Times; Security Switch Snmp Trap Inform Timeout

C HAPTER 15 | Security Commands
SNMP Commands
– 335 –
EXAMPLE
Security/Switch/SNMP/Trap/Inform>mode enable
Security/Switch/SNMP/Trap/Inform>
security switch
snmp trap inform
timeout
This command displays or sets the SNMP trap inform timeout.
SYNTAX
security switch snmp trap inform timeout [timeout]
timeout - The number of seconds to wait for an acknowledgment
before re-sending an inform message. (Range: 0-2147 seconds)
DEFAULT SETTING
1 second
EXAMPLE
Security/Switch/SNMP/Trap/Inform>timeout 5
Security/Switch/SNMP/Trap/Inform>
security switch
snmp trap inform
retry times
This command displays or sets the retry times for re-sending an SNMP trap
inform when the recipient does not acknowledge receipt.
SYNTAX
security switch snmp trap inform retry times [retries]
retries - The maximum number of times to re-send an inform
message if the recipient does not acknowledge receipt.
(Range: 0-255)
DEFAULT SETTING
5
EXAMPLE
Security/Switch/SNMP/Trap/Inform>retry times 1
Security/Switch/SNMP/Trap/Inform>