C
HAPTER
11
| Port Commands
ā 288 ā
EXAMPLE
This example indicates that power usage for port 5 is 41% of normal.
Port>power 5 enable
Port>power 5
Port Power Usage
---- -------- -----
5 Enabled 41 %
Port>
port excessive This command displays or sets the response to take when excessive
transmit collisions are detected on a port.
SYNTAX
port excessive [port-list] [discard | restart]
port-list - A specific port or a range of ports. (Range: 1-28, or all)
discard - Discards a frame after 16 collisions.
restart - Restarts the backoff algorithm after 16 collisions.
DEFAULT SETTING
Discard
EXAMPLE
Port>excessive 5 restart
Port>
To Next Page
