Digisol DG-GS4528S - Security Switch Snmp View Delete; Security Switch Snmp View Lookup

C HAPTER 15 | Security Commands
SNMP Commands
– 345 –
security switch
snmp view delete
This command deletes an SNMPv3 view entry.
SYNTAX
security switch snmp view delete index
index - Index to SNMPv3 view table. (Range: 1-64)
DEFAULT SETTING
None
EXAMPLE
Security/Switch/SNMP/View>lookup
Idx View Name View Type OID Subtree
--- -------------------------------- --------- -------------------------
1 default_view included .1
2 ifEntry.a included .1.3.5.1.2.1.2.2.1.1.*
Number of entries: 2
Security/Switch/SNMP/View>delete 2
Security/Switch/SNMP/View>
security switch
snmp view lookup
This command displays SNMPv3 view entries.
SYNTAX
security switch snmp view lookup [index]
index - Index to SNMPv3 view table. (Range: 1-64)
DEFAULT SETTING
Displays all entries.
EXAMPLE
Security/Switch/SNMP/View>lookup
Idx View Name View Type OID Subtree
--- -------------------------------- --------- -------------------------
1 default_view included .1
2 ifEntry.a included .1.3.5.1.2.1.2.2.1.1.*
Number of entries: 2
Security/Switch/SNMP/View>