Digisol DG-GS4528S - Ip Dns; Ip Dns_Proxy

C HAPTER 10 | IP Commands
– 276 –
ip dns This command displays or sets a DNS server to which client requests for
mapping host names to IP addresses are forwarded.
SYNTAX
ip dns [ip-addr]
ip-addr - IP address of domain-name server. An IPv4 address
consists of 4 numbers, 0 to 255, separated by periods.
DEFAULT SETTING
None
EXAMPLE
IP>dns 192.168.1.55
IP>
ip dns_proxy This command displays or sets DNS proxy mode which can maintain a local
database based on previous responses to DNS queries forwarded on behalf
of attached clients.
SYNTAX
ip dns_proxy [enable | disable]
enable - Enables DNS proxy service.
disable - Disables DNS proxy service.
DEFAULT SETTING
Disabled
COMMAND USAGE
If enabled, the switch maintains a local database based on previous
responses to DNS queries forwarded on behalf of attached clients. If the
required information is not in the local database, the switch forwards the
DNS query to a DNS server, stores the response in its local cache for future
reference, and passes the response back to the client.
EXAMPLE
IP>dns_proxy enable
IP>