C
HAPTER
15
| Security Commands
ARP Inspection Commands
ā 387 ā
security network arp
inspection
configuration
This command shows the administrative setting for ARP Inspection on the
switch and all ports; and also displays entries in the ARP inspection table.
SYNTAX
security network arp inspection configuration
EXAMPLE
Security/Network/ARP/Inspection>configuration
ARP Inspection Configuration:
=============================
ARP Inspection Mode : Disabled
Port Port Mode
---- -----------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
13 Disabled
14 Disabled
15 Disabled
16 Disabled
17 Disabled
18 Disabled
19 Disabled
20 Disabled
21 Disabled
22 Disabled
23 Disabled
24 Disabled
Table 40: ARP Inspection Commands
Command Function
security network arp
inspection configuration
Shows the administrative setting for the switch and all ports; also
displays entries in the ARP inspection table
security network arp
inspection mode
Enables or disables Dynamic ARP Inspection globally on the switch
security network arp
inspection port mode
Enables or disables Dynamic ARP Inspection on a port or range of
ports
security network arp
inspection entry
Adds or deletes a static entry in the ARP Inspection table
security network arp
inspection status
Displays static and dynamic entries in the ARP Inspection table
To Next Page
