Digisol DG-GS4528S - Security Network Dhcp Snooping Port Mode; Security Network Dhcp Snooping Statistics

C HAPTER 15 | Security Commands
DHCP Snooping Commands
– 381 –
security network
dhcp snooping port
mode
This command sets the trust mode for a port or range of ports.
SYNTAX
security network dhcp snooping port mode [port-list] [trusted |
untrusted]
port-list - A specific port or a range of ports. (Range: 1-28 or all)
trusted - Sets a port as a trusted source of DHCP messages.
untrusted - Sets a port as an untrusted source of DHCP messages.
DEFAULT SETTING
Trusted
EXAMPLE
Security/Network/DHCP/Snooping>port mode 1 trusted
Security/Network/DHCP/Snooping>
security network
dhcp snooping
statistics
This command shows or clears statistics for various types of DHCP protocol
packets.
SYNTAX
security network dhcp snooping statistics [port-list] [clear]
port-list - A specific port or a range of ports. (Range: 1-28 or all)
clear - Clears the counters for the selected port.
DEFAULT SETTING
Displays statistics for all ports.
COMMAND USAGE
For a description of the information displayed by this command, see
"Displaying Statistics for DHCP Snooping" on page 215.
EXAMPLE
Security/Network/DHCP/Snooping>statistics 1
Port 1 Statistics:
--------------------
Rx Discover: 0 Tx Discover: 0
Rx Offer: 0 Tx Offer: 0
Rx Request: 0 Tx Request: 0
Rx Decline: 0 Tx Decline: 0
Rx ACK: 0 Tx ACK: 0
Rx NAK: 0 Tx NAK: 0
Rx Release: 0 Tx Release: 0
Rx Inform: 0 Tx Inform: 0
Rx Lease Query: 0 Tx Lease Query: 0
Rx Lease Unassigned: 0 Tx Lease Unassigned: 0
Rx Lease Unknown: 0 Tx Lease Unknown: 0