C
HAPTER
15
| Security Commands
DHCP Relay Commands
ā 378 ā
security network
dhcp relay
information policy
This command displays or sets the DHCP relay policy for DHCP client
packets that include Option 82 information.
SYNTAX
security network dhcp relay information policy [replace | keep |
drop]
replace - Overwrites the DHCP client packet information with the
switch's relay information.
keep - Retains the client's DHCP information.
drop - Drops the packet when it receives a DHCP message that
already contains relay information.
DEFAULT SETTING
Replace Option 82 information
EXAMPLE
Security/Network/DHCP/Relay/Information>policy keep
Security/Network/DHCP/Relay/Information>
security network
dhcp relay statistics
This command displays or clears DHCP relay statistics.
SYNTAX
security network dhcp relay statistics [clear]
clear - Clears DHCP relay statistics.
DEFAULT SETTING
Displays DHCP statistics
COMMAND USAGE
For a description of the information displayed by this command, see
"Displaying DHCP Relay Statistics" on page 217.
EXAMPLE
Security/Network/DHCP/Relay>statistics
Server Statistics:
------------------
Transmit to Server : 0 Transmit Error : 0
Receive from Server : 0 Receive Missing Agent Option : 0
Receive Missing Circuit ID : 0 Receive Missing Remote ID : 0
Receive Bad Circuit ID : 0 Receive Bad Remote ID : 0
Client Statistics:
--------------------
Transmit to Client : 0 Transmit Error : 0
Receive from Client : 0 Receive Agent Option : 0
Replace Agent Option : 0 Keep Agent Option : 0
Drop Agent Option : 0
To Next Page
