Digisol DG-GS4528S - DHCP Relay Commands; Security Network Dhcp Relay Configuration; Table 37: DHCP Relay Commands

C HAPTER 15 | Security Commands
DHCP Relay Commands
– 375 –
EXAMPLE
Security/Network/ACL>status
User
----
S: Static
I: IP Source Guard
A: ARP Inspection
U: UPnP
D: DHCP
User ID Port Frame Action Rate L. Port C. CPU CPU Once Counter Conflict
---- -- -------- ----- ------ -------- -------- --- -------- ------- --------
S 1 Any Any Permit Disabled Disabled No No 30 No
Number of ACEs: 1
Security/Network/ACL>
DHCP RELAY COMMANDS
This section describes commands used to configure DHCP Relay and Option
82 Information.
security network
dhcp relay
configuration
This command displays DHCP relay configuration settings.
SYNTAX
security network dhcp relay configuration
EXAMPLE
Security/Network/DHCP/Relay>configuration
DHCP Relay Mode : Disabled
DHCP Relay Server : NULL
DHCP Relay Information Mode : Disabled
Table 37: DHCP Relay Commands
Command Function
security network dhcp
relay configuration
Displays DHCP relay configuration settings
security network dhcp
relay mode
Displays or sets DHCP relay operational mode
security network dhcp
relay server
Displays or sets the IP address of the DHCP relay server
security network dhcp
relay information mode
Displays or sets the DHCP Relay Option 82 mode
security network dhcp
relay information policy
Displays or sets the DHCP relay policy for DHCP client packets that
include Option 82 information
security network dhcp
relay statistics
Displays or clears DHCP relay statistics