Digisol DG-GS4528S - Ip Ntp Server Delete

C HAPTER 10 | IP Commands
– 282 –
DEFAULT SETTING
None
COMMAND USAGE
The switch attempts to periodically update the time from the specified
servers. The switch will poll the time servers in the order specified until a
response is received. The polling interval is fixed at 15 minutes.
EXAMPLE
IP/NTP/Server>ipv6 add 2 fe80::215:c5ff:fe03:4dc7
IP/NTP/Server>
ip ntp server delete This command deletes an entry from the list of NTP servers.
SYNTAX
ip ntp server delete server-index
server-index - The index number of an NTP server to query.
(Range: 1-5)
DEFAULT SETTING
None
EXAMPLE
IP/NTP/Server>delete 2
IP/NTP/Server>